Voile USA
Voile
*Shipping will be quoted after checkout
*Shipping will be quoted after checkout
Voile Light Rail Splitboard binding *
A$
299.00
Simplify, reduce weight, and increase performance of your Voile splitboard binding system with the new Voile Light Rail splitboard binding. The Voile Light Rail integrates the Slider Track and Strap Binding into a lightweight, low profile, and stiff splitboard binding.
The binding base plate is cut away to eliminate ice build-up and reduce weight. The baseplate aluminum rails are CNC machined from solid 7075-T6 bar stock aluminum for amazing durability.
An Avalanche Rip Cord has been attached to both quick release buckles to aid when backcountry riding in avalanche prone areas.
The Voile Light Rail works with current Voile Slider Pins. 2 Slider Pins w/lanyards are included with pair of Light Rail splitboard bindings.
Sizes M,L
The binding base plate is cut away to eliminate ice build-up and reduce weight. The baseplate aluminum rails are CNC machined from solid 7075-T6 bar stock aluminum for amazing durability.
An Avalanche Rip Cord has been attached to both quick release buckles to aid when backcountry riding in avalanche prone areas.
The Voile Light Rail works with current Voile Slider Pins. 2 Slider Pins w/lanyards are included with pair of Light Rail splitboard bindings.
Sizes M,L
Voile Crampon *
A$
114.00
For steep, icy, and exposed ascents or that frustrating icy skin track, there is the Voile splitboard crampon. Used with Voile splitboard skins, the Voile splitboard crampon can function fixed to your splitboard or mobile for easy walking. The fixed mode is recommended for high exposure and where security in each step is essential. The slot in the back of the crampon fits under the heel pad for the fixed mode. The mobile mode is for more moderate ascents and will increase energy efficiency by decreasing drag of the crampon on each step. A rotating puck holds the crampon to the binding for the mobile mode. The crampon is attached to the board half using a longer Slider Pin(4 9/16") made specifically for the crampon. This Slider Pin will work for securing your binding for ride mode. Weight/pr. 1lb./0.45kg, Clearance for fitting crampon to board half: 13.7cm. Includes a nylon storage bag.
Voile SD Mtn Plate Kit *
A$
70.00
The SD Mtn Plate Binding Kit is for most hard shell mountaineering and alpine
touring/randonee boots. The Mtn Plate uses a toe-throw lever for easy in and out
of the binding. All hardware has bomber durability with stainless steel and
super tough nylon parts. All hardware mounts to any Voile Universal Slider
Track.Weight/pr.(Hardware only.) 1.lb. 5oz./0.60kg
Voile DIY Splitboard Kit *
A$
189.00
This is kit you need if you want to cut your old board and make a custom splitboard.
The Voile Split Kit includes all the hardware and super easy to follow step-by-step instructions to split your old snowboard. And no need to invest in a new pair of snowboard bindings either, just use your old snowboard bindings (any factory standard 4-hole disc binding will work; if toe part of the binding does impede the rotation at all simply
slide the binding back a bit on the mounting plate).
The Voile Split Kit includes all the hardware and super easy to follow step-by-step instructions to split your old snowboard. And no need to invest in a new pair of snowboard bindings either, just use your old snowboard bindings (any factory standard 4-hole disc binding will work; if toe part of the binding does impede the rotation at all simply
slide the binding back a bit on the mounting plate).
Voile Universal Splitboard Hardware *
A$
114.00
Attention! Please Read! This hardware kit is for factory-built
splitboards that have inserts. It is NOT for Sawing Your Old Board
(Split Kit - DIY).
Got a new splitboard and it's not a Voile?
This is the rest of hardware you need to get on the snow.
Don't forget Voile Splitboard Climbing skins.
Works with these brands
Burton Snowboards Unity Snowboards
Jones Snowboards Venture Snowboards
K2 Snowboards Voile Splitboards
LibTech Snowboards Winterstick Snowboards
Never Summer Snowboards Spark R&D
Prior Snowboards
Got a new splitboard and it's not a Voile?
This is the rest of hardware you need to get on the snow.
Don't forget Voile Splitboard Climbing skins.
Works with these brands
Burton Snowboards Unity Snowboards
Jones Snowboards Venture Snowboards
K2 Snowboards Voile Splitboards
LibTech Snowboards Winterstick Snowboards
Never Summer Snowboards Spark R&D
Prior Snowboards
Voile Splitboard dual height climbing heels *
A$
49.00
Upgrade your
splitboard with the new Voile splitboard dual height climbing heels.
The back climbing wire is the standard height of 55mm and the front wire is 75mm.
Also new, a durable plastic coating is applied to the top of each wire to prevent wear on your splitboard binding base plate.
Includes 1 pair of dual height climbing heels/wires and screws to mount to an inserted OR factory-built splitboard.
The back climbing wire is the standard height of 55mm and the front wire is 75mm.
Also new, a durable plastic coating is applied to the top of each wire to prevent wear on your splitboard binding base plate.
Includes 1 pair of dual height climbing heels/wires and screws to mount to an inserted OR factory-built splitboard.
Voile Poles *
A$
95.00
For
splitboarders, skiers or snowshoers
New innovative 3-part touring pole with integrated ski/board topsheet scraper mounted to the pole grip. Why should you carry an extra 2 Kgs of snow on your nice lighweight ski or board? Use this conveniently located scraper to clean off your ski/board topsheet. Manufactured with heavy-duty nylon so it will take a ton of abuse. Also, use the scraper to pull your climbing wire to the up position.
It gets better. Our poles use a push-button system to adjust the size. It is similar to the pop-buttons you find on our avalanche shovels handles. The push-button is a great alternative to problematic internal locking-mechanisms that can freeze and bind-up.
1 pair of poles. 1 pole is installed with a snow scraper.
Adjustment range 107cm to 137cm. Collapses to 63cm.
New innovative 3-part touring pole with integrated ski/board topsheet scraper mounted to the pole grip. Why should you carry an extra 2 Kgs of snow on your nice lighweight ski or board? Use this conveniently located scraper to clean off your ski/board topsheet. Manufactured with heavy-duty nylon so it will take a ton of abuse. Also, use the scraper to pull your climbing wire to the up position.
It gets better. Our poles use a push-button system to adjust the size. It is similar to the pop-buttons you find on our avalanche shovels handles. The push-button is a great alternative to problematic internal locking-mechanisms that can freeze and bind-up.
1 pair of poles. 1 pole is installed with a snow scraper.
Adjustment range 107cm to 137cm. Collapses to 63cm.
Voile Climbing Skins *
A$
179.00
The Voile Tractor
Skins are made specifically for splitboards.
The Voile SD Tractor skins are cut to fit the left and right splitboard half.
The Voile SD Tractor skins are cut to fit the left and right splitboard half.
- Constructed from a very hydrophobic nylon mohair material that repels water and ice
- Features a bomber riveted stainless-steel tip loop that can take a ton of abuse while on the climb up
- Super-sticky glue holds the skins securely in place
- Trim tool and nylon storage bag included;
- skins are 152cm long
Voile XLM Shovel *
A$
80.00
A more pack friendly, lightweight, and easier to use avalanche shovel and snow saw combination, the T6 Tech conveniently stows a 14"/36cm snow saw blade. The snow saw blade is easily and conveniently attached to the end of the shovel shaft for avalanche snow science work and winter shelter building.
Voile Tourlight Avalanche Probe 2.6M *
A$
75.00
The Tourlight Probe
is one of the easiest and fastest to assemble avalanche probes. Speed cones
attached to the end of each probe section speed up assembly. It assembles in
seconds by pulling the lead inner tube attached to a coated stainless steel
cable. It locks into place with a simple, strong pop-button. The probe includes
5cm increment lazer etched depth markings for accurate snow depth checks.
The stainless steel cable has an adjustment knob to adjust cable tension if the probe is loose when assembled. Includes nylon storage bag. The storage bag has strap loops to strap the probe to any shovel handle.
The stainless steel cable has an adjustment knob to adjust cable tension if the probe is loose when assembled. Includes nylon storage bag. The storage bag has strap loops to strap the probe to any shovel handle.
Voile Straps *
A$
9.00
If anything is
better than duct tape it is Voile Straps. Made of tough stretch polyurethane and
a hardened aluminum buckle, Voile Straps have many uses. You should always carry
a few Voile Straps when travelling in the backcountry. A-frame skis on your
pack, fix a pesky climbing skin, hold your shovel and probe together and of
course hold your skis together for transport. Available in 9"/23cm, 12"/30cm,
15"/38cm, 18"/46cm, and 24"/61cm. 9 inch length strap uses a tough nylon strap
buckle.
